Bluetooth Settings; Bluetooth Telephone - Pioneer MVH-330DAB: MVH-130DAB Mode D'emploi

NOTES
• Depending on the device, the PIN code is required in step 7. In this case, input [0000].
• Only one single device can be paired/registered at any one time. The previously paired/registered
device information is overwritten/deleted when a new device is paired/registered to this unit.
• Disconnect a registered device in the [BT CON] menu when you register a new device.
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,
[VISBL] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations,
refer to the operating instructions supplied with the Bluetooth device.

Bluetooth settings

1
Press to display the phone menu.
2
Turn the M.C. dial to select [BT SETUP], then press to confirm.
Menu Item
BT CON
[ON], [OFF]
ADD DEV
A CON
[ON], [OFF]
VISBL
[ON], [OFF]
PIN CODE
DEV. INFO

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 11).
Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
Description
Display the paired Bluetooth devices. "*" appears on the device
name when the Bluetooth connection is established.
Register a new device.
Select [ON] to connect to a Bluetooth device automatically.
Select [ON] so that a Bluetooth device can detect the unit.
Change the PIN code.
1 Press the M.C. dial to display the setting mode.
2 Turn the M.C. dial to select a number.
3 Press the M.C. dial to move the cursor to the next position.
4 After inputting the PIN code, press and hold the M.C. dial.
Switch the device information on the display between the
device name and Bluetooth device address.
- 12 -