Stihl MS 462 C-M Notice D'emploi page 6

English
1 Front Hand Guard
Helps protect the operator's left hand from projecting
branches and contact with the saw chain. Serves as the
activation lever for the chain brake.
2 Muffler with Spark Arresting Screen
Reduces engine exhaust noise and diverts exhaust
gases away from the operator. The spark arresting
screen is designed to reduce the risk of fire.
3 Bumper Spike
Helps hold the saw steady against the wood during
cutting.
4 Saw Chain
Toothed cutting tool consisting of cutters, tie straps and
drive links.
5 Guide Bar
Supports and guides the saw chain.
6 Chain Catcher
Helps contain the saw chain and reduce the risk of
operator contact in the event the chain breaks or comes
off the bar.
7 Side Chain Tensioner
Permits precise adjustment of saw chain tension.
8 Chain Sprocket
Drives the saw chain.
9 Chain Sprocket Cover
Covers the chain sprocket.
10 Nuts
Tighten the chain sprocket cover to the chain saw.
11 Shroud
Covers the air filter and engine.
12 Shroud Lock
Lock for the shroud.
13 Front Handle
Handle for the operator's left hand.
14 Decompression Valve (not available on all models)
Makes starting easier.
4
All manuals and user guides at all-guides.com
15 Spark Plug
16 Shutter for Summer or Winter Operation
17 Spark Plug Boot
18 Air Filter
19 Throttle Trigger Lockout
20 Rear Handle
21 Rear Hand Guard
22 Throttle Trigger
23 Master Control Lever
24 Fuel Filler Cap
25 Starter Grip
26 Oil Flow Adjusting Screw
27 Oil Adjustment Limiter
28 Oil Filler Cap
29 Chain Scabbard
Ignites the fuel-air mix in the engine.
With summer and winter positions. Carburetor is heated
in winter position.
Connects the spark plug with the ignition lead.
Filters the air drawn into the engine.
Prevents activation of the throttle trigger until depressed.
Handle for the operator's right hand.
Helps protect the operator's right hand in the event the
chain breaks or comes off the bar.
Controls the speed of the engine.
Lever for choke control, starting throttle, run and stop
switch position.
Closes and seals the fuel tank.
The grip of the pull starter for starting the engine.
For adjusting the amount of chain oil.
Limits travel of oil flow adjusting screw.
Closes and seals the oil tank.
Covers the guide bar and saw chain to reduce the risk of
injury from inadvertent contact during transportation and
storage.
3 Main Parts
0458-790-8221-A