Switching The Light On And Off; Changing The Colour Temperature; Making The Connection Between Cooker Hood And Hob - Atag Wu7095Mx Notice D'utilisation

Switching the light on and off

1. Shortly press and release the light button.
The light switches on at maximum strength.
2. Press and hold the lighting button to set the lighting strength.
The lighting changes from maximum to minimum strength and vice versa.
3. To turn off the light, shortly press the light button while the light is on.

Changing the colour temperature

You can adjust the lighting color temperature.
1. Press and hold the light button. Press the – (minus) button to make the light 'colder' or press the
+ (plus) button to make the light 'warmer'.

Making the connection between cooker hood and hob

To operate the cooker hood with the hob, you must make a connection between the hob and the
hood.
To make the connection, the Connection setup mode of the cooker hood and the hob must be
activated.
See also the manual for the hob. Check our website for the full range of hobs that can be connected
to your cooker hood.
1. The hood and lights must be switched off.
2. Press and hold simultaneously the – (minus) and the + (plus) button for 3 seconds. All the
indicators will blink simultaneously for a maximum of 3 minutes.
3. On your hob, activate the pairing mode in the user menu (see the hob manual). The connection
to the hob is established.
4. If the connection is successful, the cooker hood will return to standby.
NOTE!
When operating is overruled (by manually operating the cooker hood) in connection mode, the
pairing will be lost and must be paired again.
Operation
11