cecotec PERFECT FIX 360 FREESTYLE Manuel D'instructions page 58

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Nozzle
2. Nozzle thermal protection cover
3. Operating trigger
4. Glue bar
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and
other packaging elements in a safe place to prevent damage to the device if you need
to transport it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Do not remove the serial number of the appliance in order to keep a correct traceability of
it in case of assistance.
Box content:
- Hot melt glue gun
- Storage case
- Protective table stand
- Glue bars (x20)
- Charging cable
- Instruction manual
3. OPERATION
Charging the battery
ATTENTION: during the charging process the handle may heat up, it is normal.
Note: if the battery charges improperly, it could get damaged. Do not ever charge the battery in
a room temperature below 10 ºC or over 40 ºC.
- The battery is supplied half-charged to prevent damage due to total discharge.
- The battery must be fully charged before using the device for the first time and whenever
58
PERFECT FIX 360 FREESTYLE