Cleaning Your Appliance - THOMSON Geni Mix Pro Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Error
Description
code
E1
Safety switch not fixed
E2
Temperature sensor
missing
E3
Motor blocked
E4
Too high temperature
E5
Motor temperature too
high
E7
Speed transfer failure
E8
Motor NTC missing
E11
Cannot use Pulse or not
over 4

Cleaning your appliance

1. DO NOT wash any parts of your cooker in a dishwasher. Always wash the cooker thoroughly
after every use, or it has not been used for an extended period of time.
2. Unplug the appliance from the wall outlet and let the unit cool before cleaning.
3. Wash the removable cooking pot with warm soapy water. Rinse and dry thoroughly.
4. Wipe main body with a clean damp cloth. If food residue remains, dampen cloth in warm
soapy water before wiping. NEVER submerge the main body in water or other liquid. Wipe the
stationary pot as necessary to remove any food product.
5. In order to maintain good performance of soup maker, the bottom of the removable cooking
pot should be inspected and cleaned, if necessary, after each use. Wipe with a soft damp cloth
and dry thoroughly before using.
6. If the soup maker is not used for a period of time, please unplug it and keep in cool and clean
area
Possible reasons
Jar or jar lid is not fixed
properly.
The jar is not in place, or
connection of the tempe-
rature sensor at the jar
base is damaged
Too big loading in the jar
No food in the jar, or
very little food with high
temperature setting for
too long time.
The machine works at
high loading for too long
time
Speed changing
between low level (1-5)
and high level (6-10)
blocked
Motor temperature sen-
sor connection loose or
damaged
The temperature in the
jar is over 60°C
Solution
Re-assemble the jar and jar
lid, make sure all the parts
are assembled properly and
tightly
Re-assemble the jar and
make sure it is fixed properly
and tightly
Decrease the volume of the
food in the jar, or cut the
food to smaller pieces and
re-start the machine.
Add food in the jar
Stop and let the machine to
cool before re-started
Remove the jar, turn the
lower clutch manually and fix
the jar and restart.
Stop using and send to after
sales service center to fix it
Cool down the food and
Pulse again, or use not
over 4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Thfp07884

Table des Matières