THOMSON Geni Mix Pro Manuel D'utilisation page 26

Cutting blade assembly:
Fix the sealing ring on the blade assembly, put it into the through the hole of the jar bottom, hold
the half top of the blade tightly and turn bottom upside, use the fixing bracket to fix the blade by
turning clockwise. Doing oppositely to remove it from the jar. Do not miss the blade sealing ring
between the blade and the jar bottom.
Kneading blade assembly:
Remove the blade, fix the kneading shaft the same way as fixing the blade. It can be used for
kneading, or stirring and mixing without cutting the food.
• The blade is very sharp. Please wrap the blade
with washcloth when assembling or removing the
bl Please hold the blade assembly firmly and take
it out carefully so as to ensure that blade assembly
will not fall down and cause danger.
• Please make sure that the fixing bracket and
the sealing ring is in place and locked tightly
with blade assembly. If the sealing ring isn't well
placed, the food being mixed or cooked may leak
out and damage the appliance.
• Do not use it for speed over 3, otherwise it will
cause big vibration to the machine and cause risk.
• As the smallest distance between the stirring
assembly and the jar wall is only 1cm, sometimes
the food may stuck and the motor may stop for
self-protection. Use the spatula to mix and remove
the stuck and it will be smoothly working again.
• Please make sure that the fixing bracket and
the sealing ring is in place and locked tightly
with blade assembly. If the sealing ring isn't well
placed, the food being mixed or cooked may leak
out and damage the appliance
Notice
Notice