Turning The Appliance On Manually; Turning The Appliance On Automatically - Bosch PCQ715M90V Mode D'emploi

Gas burner operation
Fig. 1
Fig. 2
Fig. 3.
Turning the
appliance on
manually
Turning the
appliance on
automatically
Each control knob is marked to show which burner it
controls. Fig. 1.
Make sure all burner parts and pan supports are
correctly installed in order for the appliance to work
correctly. Fig. 2-3.
1. Press the control knob for the selected burner and turn
it counterclockwise to the desired setting.
2. Use any type of lighter or flame (cigarette lighter,
matches, etc.) and bring it close to the burner.
If your cooktop can be switched on automatically (ignition
sparkers):
1. Press the control knob for the selected burner and turn
it counterclockwise to the highest setting.
While the control knob is pressed, sparks are produced
on all burners. The flame will ignite (you may then release
the control knob).
2. Turn the control knob to the desired setting.
If the flame does not ignite, turn the control knob to the
Off setting and repeat the above steps. This time, press
and hold the control knob for a longer period of time (up
to 10 seconds).
Warning! If after 15 seconds the flame does not ignite,
turn off the burner and open a nearby window or door.
Wait at least one minute before trying to turn the burner
on again.
23