Ergon BX3 Evo Mode D'emploi page 13

ERGON BIKE ERGONOMICS
Adjusting the Back Length
1. Loosen the Velcro.
3. Loosen the connection of the Velcro surfaces that connect
the backpack compartment and the adjustable back plate
and hold it open.
5. Thread the strap through the eye of the required size.
Close the Velcro and stow the end of the strap in the
opening.
2. Pull the opened Velcro strap from the eye
of the adjustable back plate.
4. Pull the back plate to the required size (S/M/L/XL), and
close the Velcro again. The required size is correctly set when
a green marker can be seen above the relevant size marking.
6. The contoured, horizontal aluminium bar can be individually
adjusted, if required. It prevents the backpack from bulging
against the wearer's back.
14
EN