Uponor Contec On; Safety Instructions And Tips - Uponor Contec ON Manuel D'installation Et De Fonctionnement

Uponor Contec ON

UK
Before installing Uponor Contec ON, the fitter
has to read and understand these installation/
operating instructions, and follow them during

Safety instructions and tips

In these mounting/operating instructions the following
symbols are used:
Danger! Injuring/bruising is possible. Not
observing these instructions can lead to
serious damage to health or damage to
property.
Caution! Important instruction regarding the
function.
Information. Useful tips and important
information.
Operating pressure
Temperature
Time
U P O N O R C O N T E C O N · I N S TA L L AT I O N A N D O P E R AT I O N I N S T R U C T I O N S
installation. The technical information is
subject to modification.
Designated application
Uponor Contec ON is used for covering peak loads
or for thermal regulation (cooling/heating). Uponor
Contec ON is used as part of the technical building
equipment and is operated with heating water as per
VDI 2035.
All notes in these installation/operating
instructions must be observed when operating
Uponor Contec ON.
Modifications or changes to this equipment
are only permitted after the manufacturer's
approval. The manufacturer does not accept
liability for damages arising from improper
use.
Authorised fitters/sources of danger
Uponor Contec ON may only be installed, put
into operation and maintained by authorised
personnel. Personnel to be trained may only
work with this product under supervision of
an experienced person.
The fitter must read, understand and observe
these mounting/operating instructions
(especially the "Safety" section). The
manufacturer can be held liable only under
the above mentioned conditions.
Use the Uponor pipe cutter only for cutting
plastic pipes.
3