Appliance Identification; Handling - Vortice VORT QBK Notice D'emploi Et D'entretien

ENGLISH

Appliance identification

In compliance with legal requirements, an ID plate is
fitted to the inspection panel. This plate shows the
appliance identification details and its main technical
characteristics. Fig. 1 shows a sample ID plate and
legend.
1 1
5
1 Type and model
2 IP motor protection
3 Power supply
4 Motor classification
5 Absorbed power
6 Absorbed current
7 Continuos operation
8 Motor revolutions
9 Max ambient Temperature
10 Product code
11 CE mark
1
3
6
8
10

Handling

Before moving the appliance, make sure that the
equipment being used has an adequate lifting
capacity.
Use a fork lift truck and pallet to lift the appliance.
Alternativly, in the case of QBK POWER, it's possible
to lift the appliance with harness, as shown in fig. 2.
2 2
2
4
7
9
11
The appliance can be lifted manually in accordance
with the applicable legislation. When lifting the
appliance, take great care not to damage the side
panels. During transport and handling, the appliance
should remain in the vertical position and must never
be turned upside down or leaned over.
The weight of each model is shown in the table shown
in Fig. 3a,3b,3c and 3d.
3a 3a
QBK 1000
QBK 7/7
QBK 9/9
QBK 9/9
QBK 10/10
QBK 10/10
QBK 12/12
QBK 12/12
.
.
Kg
Cod
45260 30
45261
23,5
45262 31
45263 33
45264
40,6
45205
35,3
45206
75
45207
58,7
13