Operation - newcook NL571 Mode D'emploi

ASSEMBLY OF THE GLASS JAR
1. Mount the jar sealing ring onto the blade base ,and Mount the
blade base into the jar base, and the inside ring of jar base is
tighten on jar base as far as fixed the blade base tight.
2. After putting the ingredients in the jar, fix the lid onto the jar
by pressing down.
3. Insert the Measuring cup into the opening of the lid, and tune
it in anticlockwise direction until it is locked.
4. Mount the jar with jar unit onto the main base, and tune the
jar in anticlockwise direction until the jar is locked.
USE AND OPERATION
Trial use:
1. Revolve the Shaft knob, then lift the machine arm.
2. Put the mixing bowl and mixing bowl cover onto the base, and lock it as the
arrowhead denotes.
3. Revolve the Shaft knob, then push the upper cover down and make the arm
down. Make sure the arm is fixed together the base, then Revolve the Shaft
knob up to lock the arm solidly.
4. Plug-in the cord, and turn the switch to P, then try every speed for a few
seconds.
5. After the trial, turn the switch to Speed 0.
6. Turn the Shaft knob and lift the arm, then take apart the mixing blade from
the blade conector.
7. Take off the back cover from the upper housing.
8. Pure a cup of water into the blender jar, set the blender jar onto the machine,
then repeat step 4, 5 and 6.
9. Take off the blender jar, and set the Caudal cover to the machine.
27