Jeulin Initio 2 Mode D'emploi page 11

Measure
Initio 2 conductivity meter
Ref : 701 653
1. Description
The Initio 2 conductivity meter is an instrument that measures the ionic conductivity of a
solution making use of a conductivity measurement cell. It can also save and store data,
and restore them later onto a computer.
A WIFI module (ref 451 470) is also available to display and save the measurement on a
tablet or a PC with WIFI.
The Initio 2 conductivity meter is fitted with an analogue output and can be used with an
ExAO interface with direct inputs through banana connectors or a Groomy
the jack.
Input for CTA
probe
Input for CTM
probe
On/Off button (1)
Return button (2)
Knob/OK (3)
2. Use
It is recommended that the Initio 2 battery should be fully recharged when it is used for the
first time. This should be done using the ��USB charger (7) delivered in a separate package.
In general, it is recommended that complete charge/discharge cycles should be carried out
(wait until the instrument is fully discharged before completely recharging it).
ENGLISH
Menu button (4)
10
® interface using
Banana analogue
outputs (5)
Jack analogue output (6)
��USB connector (7)