DENTAURUM 744-712-00 Mode D'emploi page 9

Headgear Adjustment
Position the headgear on the patient's head. To ensure a good fit, push the loose ends of the straps through
the two-way securing element (fig. A) or locking element (fig. B) as applicable.
Using the stapler, secure the straps with 3 staples (fig. C) and cut off ends.
A
In order to avoid injury, the open ends of the staples must point
away from the head.
A
B
"High Pull" headgear
Designed for chin-cap treatment
A = with chin cap (elastic, porous,
air permeable)
REF 744-705-00
B = with chin cap (rigid with small
external hooks)
REF 744-709-00
Headgear color = blue
One type is suitable for all head and chin
sizes.
B C
A
B
"Vertical Pull" headgear
Designed for chin-cap treatment
A = with chin-cap (elastic, porous,
air permeable)
REF 744-706-00
B = with chin cap (rigid with small
external hooks)
REF 744-710-00
Headgear color = blue
One type is suitable for all head and chin
sizes.
Staples
Chin pad
For lining the chin cap
Recommended for use in high tempera-
tures, high humidity, or if the patient
suffers from allergies.
REF 744-616-00
EN
9