Attaching a lens
1
Remove the body cap from the camera and the rear lens cap from the
rear of the lens.
2
Mount the lens by aligning the two white index marks (mounting
indexes) on the lens and camera.
3
While pushing the lens lightly toward the camera, turn the lens slowly
in the direction of the arrow until it clicks into the locked position.
Setting the language and the clock
1
Set the ON/OFF (Power) switch to "ON" to turn on the camera.
2
Select the desired language and then press the center of the control
wheel.
Mounting indexes
ON/OFF (Power) switch
Select items : //// /
Confirm : Center button
Control wheel
EN
EN
5