Operation; Applications - Arctic Cove MLT0180 Manuel D'utilisation

INSTALLING THE LIGHT ASSEMBLY AND
UPPER POLE TO THE LOWER POLE AND
BASE ASSEMBLY
See Figures 13 - 15, page 16.
Remove the following items from the hardware bag:
DD - 2 Machine screws
NOTE: Make sure the full lengths of the wiring harness and
water pickup tube can be pulled through the lower pole
and base assembly and that none of the tubes or wiring are
kinked before further installation.
 Position the assembled upper section over the lower pole
and base assembly.
 Feed the wiring harness and water pickup tube into the
lower pole.
WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Keep water and mist discharge pointed away from all
electrical devices to reduce the risk of electrocution or
electric shock.
WARNING:
Ensure all hose connections are secure before using this
product. Spilled water and leaks can result in a slippery
surface and create a slip and fall hazard.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
ASSEMBLY
 Align the screw holes on each side of the upper and lower
poles. Insert the upper pole into the lower pole.
 Insert a screw into each hole and tighten securely.
NOTE: The upper pole telescopes into the lower pole for
assembly.
 Pull the wiring harness and water pickup tube through
the rectangular opening in the base assembly.
 Orient and connect the wiring harness from the pole with
the wiring harness inside the base.
 Connect the coupler to the water tube in the base as-
sembly by pushing it onto the tube as far as it will go.
 Pull on the water tube to be sure it is fully inserted and
the coupler is securely in place.

OPERATION

WARNING:
Always remove battery pack from the product when you
are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal
injury.

APPLICATIONS

You may use this product for the following purposes:
 Connect to a 5-gallon bucket filled with water for outdoor
cooling
 Listening to music via BLUETOOTH
speaker in the unit
 LED area lighting
WARNING:
Do not use this product to spray pesticides, liquid
fertilizers, chemicals, or any liquids other than clean
water. Spraying these substances could result in serious
injury or illness to the operator or bystanders.
WARNING:
Never climb, shake, or rock misting tower. Failure to follow
these instructions can cause the misting tower to tip over
and result in death or serious personal injury.
7 — English
connection and
®