Selecting An Audio Source; Setting The Volume And Mute; Select Sound; Aux/Optical/Coaxial Mode - Renkforce RF-TB240WW Notice D'emploi

b) Selecting an audio source
• Press the SOURCE button (6, 24) repeatedly to select the desired sound source.
The LED indicators light up in the selected mode as follows:
Bluetooth solid blue
®
OPTICAL solid orange
COAXIAL flashes orange
AUX solid green
c) Setting the volume and mute
• Press the VOL + / VOL– buttons (3, 21), to adjust the volume:
VOL + increases the volume
VOL– decreases the volume
• If you want to mute the sound, press the MUTE button (20). Press the MUTE button again or press VOL + to turn
the sound back on.
• The corresponding LED indicator flashes quickly while the volume is being set.
• When you have reached the maximum volume and press VOL +, the LED indicator flashes once. When you have
reached the minimum volume and press VOL –, the LED indicator flashes once.
d) Select sound
• Select a sound preset with the buttons (9): SPORT, MOVIE, TV or DFLT:
SPORT - Watch a sports broadcast
MOVIE - Watch movies
TV
- Watch a television show
DFLT - Reset to default
e) AUX/OPTICAL/COAXIAL mode
• Make sure that the TV device or audio device is connected to the soundbar.
• Select an audio source.
• Start playback on your audio device.
• Adjust the volume.
If there is no sound in OPTICAL/COAXIAL mode, the digital/optical input indicator (7) flashes quickly.
Check the setting on your audio source (e.g. TV device, DVD/Blu-ray player). Activate the PCM output
signal of your audio source.
In AUX mode, the soundbar and subwoofer switch on automatically as soon as the connected audio source
is turned on.
38