Set-Up/Mounting - Renkforce Rf-Tb240Ww Notice D'emploi

b) Set-up/mounting
When selecting the location for installing/mounting your device, take care that it will not be subjected to
shaking, vibrations, dust, heat, cold and moisture. In addition, no powerful transformers or motors should
be used close to the device.
Never cover the soundbar and the subwoofer with a tablecloth or similar products. This may cause the
product to heat up greatly during operation and result in fire, product damage and personal injury.
When installing product with other equipment, make sure that there is sufficient ventilation. Maintain a
sufficient distance to other devices and walls. Do not place the product in the direct proximity of heat
sources. Do not point any strong spotlights or light sources at the device. This may cause the device to
overheat (fire hazard!).
When mounting the product, make sure that the mains cable is neither crushed nor damaged by sharp
edges.
The soundbar may either be set up on a TV cabinet (option A) or mounted to a wall (option B). This mainly depends
on the location of your TV device. Place the subwoofer on a level and horizontal surface with a maximum distance
from the soundbar of 6 meters.
Option - A
Setting up the soundbar (option A)
• Place the soundbar on a firm, horizontal surface.
• Make sure that there are no magnetic sources such as additional speakers in the vicinity.
Wall mounting (option B)
Warning! The product may be mounted to a wall only by a qualified specialist. By carrying out improper
work on the product you endanger not only yourself, but also others! If you are not sure how to mount the
product, consult a specialist. Do not attempt to mount it yourself.
Plan the mounting site carefully, so that the holder is located at the desired location (height and position)
after the installation is complete.
Make sure that the mounting site is sufficiently stable and firm to support the product.
Option - B
33