Using The Light; Adjusting The Brightness - Teac SR-LUXi Mode D'emploi

Using the Light

Turning the light on/off
Press the light control on the side of the unit.
< The power of the light and the audio section are
separate. You can use the light even if the audio
section is in standby (o ).
< The light gradually becomes brighter or dimmer
over a few seconds after the control is pushed.
< You can use the LIGHT button ( ) on the remote
control unit to turn on/o the light.

Adjusting the brightness

Turn the control on the side of the unit.
< Turn it right to make the light brighter and to the
left to make it dimmer.
< You can use the LIGHT buttons (+ or −) on the
remote control unit to adjust the brightness.
Adjusting the angle of the light
Turn the light angle control next to the light.
20