Listening To An External Source - Teac SR-LUXi Mode D'emploi

Listening to an External Source

Connect the AUX IN jack of the SR-LUXi to the
1
PHONES jack (audio output jack) of a portable
audio player using the supplied stereo mini-
plug cable.
< You can use this means of connection to listen to
an iPod that do not have a dock connector.
For information on iPod/iPhone compatibility, see
page 12.
Press the FUNCTION button to select AUX.
2
< You can also use the AUX button on the remote
control unit to select AUX.
Play the source, and adjust the volume of both
3
the SR-LUXi and the connected audio player.
< When using the PHONES jack of the audio player,
you must adjust its volume or you might not hear
any sound from the SR-LUXi.
< Turning the volume of the audio player up too high
might cause the sound output by the SR-LUXi to
be distorted. If this happens, reduce the volume
of the audio player until the distortion stops and
then adjust the volume level of the SR-LUXi to a
comfortable listening level.
18