Changing The Filter Element - Aventics NL1 Mode D'emploi

Masquer les pouces Voir aussi pour NL1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
AVENTICS | NL1 / NL2 / NL3 / NL4 / NL6 | R412015556–BAL–001–AD | English

Changing the filter element:

System is operating under pressure!
Opening the system when it is under pressure can result in
personal injury and cause damage to the AS maintenance unit/
device.
O
Ensure that the system is pressure-free before opening the
reservoir.
Filters become contaminated with use and must be changed
punctually.
W
With differential pressure display NL: red marking shows
when a change is needed.
W
Without differential pressure display/differential pressure
gauge NL: for active carbon filters every six months, for all
other filters yearly. This, however, is only a recommendation,
since the interval depends on the quality of the compressed air
and the amount of air throughput.
To place your order, use the material numbers listed below. You
can find the addresses for national representatives at
www.aventics.com/contact.
5
Wear parts (c/b)
Filter elements:
5 μm
8 μm
25 μm
40 μm
Pre-filter elements:
0.3 μm; G3/4
0.3 μm; G1
0.3 μm/PC reservoir with semi-/
fully automatic drain; short metal
reservoir
CAUTION
NL1 NL2 NL3 NL4 NL6
5
Wear parts (c/b)
0.3 μm/vacuum filter; long metal
reservoir with fully automatic drain
Microfilter elements:
0.01 μm; G3/4
0.01 μm; G1
0.01 μm/long metal reservoir (155)
with fully automatic drain
0.01 μm/long metal reservoir (240)
with fully automatic drain
Active carbon filter elements:
Long metal reservoir (155)
Long metal reservoir (240)
NL1,2 G1/8; NL6 G3/4
NL1,2 G1/4; NL6 G1
Exchange the filter element:
NL1, NL2, NL3, NL4, NL6
with plastic reservoir
1. Loosen the protective guard,
if present, (
4
a, b) and pull it
off downwards (
c).
4
2. Screw the reservoir (
4
out of the housing.
3. Unscrew the filter seat (
4. Exchange the filter piece
(
b, c).
5
5. Slide the filter unit (filter seat
and filter piece) back
together (
b, c).
5
NL1 NL2 NL3 NL4 NL6
NL2, NL4, NL6
with metal reservoir
d)
Pull release (
a) downwards,
4
then turn reservoir (
left before pulling it off
downwards (
c).
4
a). Unscrew the filter seat (
5
Exchange the filter piece
(
b, c).
5
Slide the filter unit (filter seat
and filter piece) back together
(
b, c).
5
8
b) to the
4
a).
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nl2Nl3Nl4Nl6

Table des Matières