Télécharger Imprimer la page

ECOVACS WINBOT MINI WG841-01 Manuel D'utilisation page 11

Publicité

Les langues disponibles

Les langues disponibles

Fill up the Water Tank
2
It is recommended to use with ECOVACS WINBOT cleaning solution. The maximum volume of the reservoir is about 60ml. In the fast cleaning
mode, the full water tank can spray water continuously for about 20 ㎡ .
Do not add too much cleaning solution to overflow the reservoir.
Do not add purified water and filtered water.
Please use ECOVACS WINBOT cleaning solution. Using other cleaners could have an adverse effect on cleaning performance.
If the cleaning solution is used up, you can temporarily use tap water instead. Using the ECOVACS WINBOT cleaning solution can have a better cleaning performance.
Note:
1.Do not put your fingers into the filling opening.
2.Wipe the water droplets on the body and the four spray outlets clean, so as not to affect the normal operation.
Tie the Safety Rope
3
Properly tie the safety rope to a stable object that cannot be easily moved (e.g. table leg, chair leg, bed leg, sofa leg, curtain rod, stair handrail, etc.),
and lock the carabiner as shown below.
Note: Please make sure to use under supervision.
People or animals are prohibited from standing directly under WINBOT working area. Make sure there are no valuable or fragile objects under this area.
To ensure safety, please make sure to secure the carabiner before use.
* It is recommended to fasten the safety rope with the carabiner on a firm and safe metal railing.
12
Maximum 60ml

Publicité

loading