Changing The Light; Start To Use; Names Of Components - Tesla Rf3900Fmx Mode D'emploi

Changing the light

• Any replacement or maintenance of the
LED lamps is intended to be made by the
manufacturer, its service agent or similar
qualified person.
• Light source in this product is replaceable only
by qualified engineers.

Start to use

• Before initial start, keep the refrigerator still for
two hours before connecting it to power supply.
• Before placing any fresh or frozen foods, the
refrigerator should have run for 2 - 3 hours, or
for above 4 hours in summer when the ambient
temperature is high.

Names of components

Door tray
Convertible
zone
Upper
freezer
drawer
Lower
freezer
drawer
The picture above is only for reference. The actual configuration will depend on the physical product or
statement by the distributor
1. Please take out the plug
2. Remove the lampshade with
3. Take down the lamp panel.
4. Remove the connection
NOTE
This product is not recommended for use
with sockets or main switch with the A/ GFCI
function, otherwise it may cause false tripping.
1. it's not pose a safety risk when tripped.
2. If tripping persists, it is recommended to
replace the sockets or main switch without A/
GFCI function.
LED lighting
Shelf
Door tray
Lower freezer
drawer
7
before removal.
a screwdriver.
terminal.
Refrigerator
body
Upper freezer
drawer
ENG