Levelling Feet; Levelling Door - Tesla Rf3900Fmx Mode D'emploi

Table des Matières
Les langues disponibles

Les langues disponibles

ENG
• Storage upon power failure
In case of power failure, the instant working state will be locked and maintained till re-electrification.
• Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though
the refrigerator may still have cold storage function with the following faults, the user shall
contact a maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.
Fault
code
Temperature sensor failure of
E1
refrigerating chamber
Temperature sensor failure of freezing
E2
chamber
Temperature sensor failure of variable
E3
temperature chamber
Failure of defrosting sensor in
E4
refrigerating chamber

Levelling feet

Levelling door

Not level
Fault description
Lower hinge
• Raise the lower door up to the level of the higher door.
• Insert the supplied fastener-ring by using plier in the gap
between the hinge-grommet and the lower hinge.The number of
fasten-rings you will need to insert depends on the gap.
The picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor
Fault
code
Freezing defrost sensor detection
E5
circuit error
E6
Communication error
Circulation of temperature detection
E7
circuit error
EH
Moisture sensor error
Schematic diagram of the levelling feet.
• Adjusting procedures:
a. Turn the feet clockwise to raise the refrigerator;
b. Turn the feet counterclockwise to lower the
refrigerator;
c. Adjust the right and left feet based on the
procedures above to a horizontal level.
The picture above is only for reference. The actual
configuration will depend on the physical product
or statement by the distributor
Hinge
grommet
Pliers
Fastener-ring
10
Fault description
List of tools to be
provided by the user
plier
Table des Matières
loading

Table des Matières