Key To Symbols - Husqvarna 150BT Manuel D'utilisation

Masquer les pouces Voir aussi pour 150BT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symbols
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Hearing protection
Approved eye protection
A breathing mask should be used when
there is a risk of dust.
Gloves should be worn when
necessary.
The blower can forcibly throw
objects that can bounce back.
This can result in serious eye
injuries if the recommended
safety equipment is not used.
The blower operator
must make sure that no
bystanders or animals
come nearer than 15
metres. Whenever
several operators are working in the same work area, they
should maintain a safe distance of at least 15 metres from
one another.
Keep all parts of your body away from
hot surfaces.
Air purge
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Switch off the engine by moving the stop
switch to the STOP position before
carrying out any checks or maintenance.
2 – English

KEY TO SYMBOLS

Always wear protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Choke lever in "open position".
Choke lever in "closed position".

Publicité

Table des Matières
loading

Table des Matières