Dynatech COMPACT 200 Instructions D'usage Et Entretien page 2

TYPE EXAMINATION CERTIFICATE
ELEVATOR COMPONENT / SYSTEM
Document number:
Certification Body:
Product:
Type:
Manufacturer:
Certificate Holder:
Date of submission:
Issuing date:
Standards of reference:
Report number:
(2)
Expiry date:
Statement:
The tensioning system for overspeed governor COMPACT 200 assessed in this certificate
can be used in connection with an appropriate overspeed governor within the scope of this
type-examination. The solution for the tensioning system deviates from clause
[5.6.2.2.1.3.d)] EN 81-20. This certificate can be mentioned as an annex in the certificate of
the overspeed governor allowed to use it.
For legal reasons, and since this system is not a safety component according to annex III of
Lifts Directive 2014/33/EU, this agency cannot issue an EU type-examination certificate
This certificate can be used as justification of the features and scope of the system, to be
assembled in the overspeed governor.
(1) Only for the clauses mentioned in the technical annex.
For other applicable reports please refer to section 2.9 of the technical annex.
(2)
This certificate has a technical annex with reference ATI / CA004 R1.
This certificate is digitally signed. Only the document issued in format 'pdf' with its signature is valid.
DAS / 000274-1
Sede Técnica: Ronda de Poniente, 4
ATI / CA004
TÜV SÜD ATISAE S.A.U.
Ronda de Poniente, 4
ES 28760 Tres Cantos MADRID
Tensioning system for overspeed governor
COMPACT 200
DYNATECH. DYNAMICS AND TECHNOLOGY S.L.
P.I. PINA DE EBRO, SECTOR C PARCELA 9
ES 50750 ZARAGOZA.
DYNATECH. DYNAMICS AND TECHNOLOGY S.L.
P.I. PINA DE EBRO, SECTOR C PARCELA 9
ES 50750 ZARAGOZA.
09.06.2022
09.20.2022
EN 81-20:2020; [5.6.2.2.1.3.d)]
(1)
8103622462 (09.20.2022)
indefinite (please refer to tech. annex section 2.7)
·
28760 Tres Cantos (Madrid)
rev: 1
.
Jordi Olivera
LCC Technical Director
·
España