Technical Description - Ferroli TERMO GIOVE Série Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The stove works exclusively on pellets and enables easy installation with the heating system. The stove's automatic
control systems guarantee optimum heat output and complete combustion; there are also safety systems to
guarantee safe operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model TERMOGIOVE ** and TERMOGIOVE 30 ** with water weating power of 20,0 kW and 23,6kW
ensures a maximum heatable volume of 570 - 674 m3, considering the coefficient of a building's energy
requirements equal to 35 W/m3, and may vary depending on the insulation, type and climatic zone which are
important variables for the correct choice of unit. For technical data, refer to the table on page 5-6.
Key:
A - Power cable connection
B - Combustion air inlet
C - Sanitary Overpressure water discharge (1/2" female - 6 bar)
D - Water system connection
E - System return (1" male )
F - System delivery (1" male )
G - Fume exhaust pipe connection D 100 mm
H - Control panel model F047
I - Pellet hopper door
L - Adjustable feet
M - Turbulator shaker handle
N - Optional DHW delivery ( 3/4" M – PUMP _ ½" M – EXCHANGER )
O - Optional DHW return ( 3/4" M – PUMP _ ½" M – EXCHANGER )
P - Supplementary delivery connection without pump (1" male)
R - Overpressure water discharge (1/2" female - 3 bar)
40
TERMOGIOVE ** - TERMOGIOVE30 **