Technical Description - Ferroli CLIO ERMETICA Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The stove works exclusively on pellets, providing healthy and safe heat in the room. The stove's automatic control
systems guarantee optimum heat output and complete combustion; there are also safety systems to guarantee safe
operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model CLIO ERMETICA with nominal power of 6,5 kW ensures a maximum heatable volume of 185 m3,
considering the coefficient of a building's energy requirements equal to 35W/m3, and may vary depending on the
insulation, type and climatic zone which are important variables for the correct choice of unit.
For technical data, refer to the table on page 5.
Key:
A - Air grilles
B - Power cable connection
C - Combustion air inlet diam. 50 mm
D - Flue pipe connection diam. 80 mm
E - Pellet hopper door
F- Rear fume outlet included in the supply but not installed
G- Cap for closing upper fume outlet hole on stove cover
31 CLIO ERMETICA