Floating Point Notation; Cleaning - Agilent Technologies 629-5001 Notice De Mode D'emploi

Floating Point Notation

The floating point notation follows the ANSI/IEEE Standard
754-1985, for Binary Floating Point Arithmetic.
Example:
AL 1 11111111[Enter] (to grant access level 1)
1
wr 31 1[Enter] (set parameter n. 31 to 1)
+
RT 0 (select report type "0")
+
HV2 OFF 0.0E-9A 0.0E+0V F=0000 E=0000
HV1 OFF 0.0E-9A 0.0E+0V F=0000 E=0000
HV2 OFF 0.0E-9A 0.0E+0V F=0000 E=0000
HV1 OFF 0.0E-9A 0.0E+0V F=0000 E=0000
HV2 OFF 0.0E-9A 0.0E+0V F=0000 E=0000
HV1 OFF 0.0E-9A 0.0E+0V F=0000 E=0000
HV2 OFF 0.0E-9A 0.0E+0V F=0000 E=0000
HV1 OFF 0.0E-9A 0.0E+0V F=0000 E=0000
HV2 OFF 0.0E-9A 0.0E+0V F=0000 E=0000

Cleaning

For safety reasons, before cleaning the controller:
1
2
3
The internal cleaning must be done only by Agilent operator.
Ion Pumps Control Unit User Manual / 87-900-124-01
Turn the controller off;
disconnect the controller power plug from the electrical outlet
disconnect all cables.
If the exterior of the controller becomes dirty, use a dry soft
cloth.
Technical Information
(C)
5
PIN Functions
97/104