Checking The Information Of The Navigation System - JVC KW-NT1 Manuel D'instructions

Checking the information of the navigation system

1
GPS
5
Satellites
(Green): Receiving the GPS signals and used for the
calculation.
(Gray): Receiving the GPS signals.
(Brown): Not receiving the GPS signals.
1 Current speed
2 Direction of the car
3 Latitude and longitude of your current position
4 Altitude of your current position
5 Date/Local time
• When the System cannot receive the GPS signals, the
value of each item above are shown as "- -."
Messages about the status of GPS signal reception
Current status of the GPS signal reception
2
System
1
2
3
6
4
7
8
9
6 Name of the unit
7 Version of the software
8 Version of the map database
9 Version of the voice guidance database
p Connection status of the ILLUMINATION CONTROL
lead
<On>: The illumination signal is detected.
q Connection status of the PARKING BRAKE lead
<On>: The parking brake is engaged.
w Connection status of the REVERSE GEAR SIGNAL
lead
<On>: Reverse gear signal is detected.
• If the rear view screen is displayed when shifting
the gear to the reverse (R) position, the reverse
gear signal is detected (<On>).
"Check GPS Check the connection of the GPS
Antenna" antenna.
"Acquiring • Acquiring GPS signals. Wait until
GPS Signal" signal reception is completed.
• GPS signals cannot be received.
Move to the place where the System
receives the GPS signals.
41
p
q
w