Parts Diagram; Set-Up Instructions - Fluval 10943 Mode D'emploi

CAUTION!
This aquarium is a breeding box for aquarium fish. DO NOT use this aquarium for other
than its intended use.
You need an air pump (discharge rate: less or equal to 1 L/ per minute) and an extra
airline tube. (Sold separately)
Turn the power off before performing maintenance.
DO NOT allow small children to touch or play with the aquarium.
USAGE REQUIREMENTS
For use with frameless aquariums:
Only use with aquariums with a glass thickness of 5 mm or more.
For use with framed aquariums:
The width of the frame must be less than 47 mm (1 ¾").
Frameless Aquarium:
more than 5 mm of
glass thickness

PARTS DIAGRAM

* Refer to the images and confirm all parts are included.
* Operation requires an air pump and a second airline tube (sold separately).

SET-UP INSTRUCTIONS

Use attachments when glass thickness of main aquarium is more than 5 mm and less
than 10 mm.
1. Wash all parts without using soap.
2. Hang empty breeding box on the main aquarium. Use leveling adjusters to make sure
the bottom of the box is perpendicular to the aquarium wall.
DO NOT twist the leveling adjuster while it remains inserted. Pull it out when
adjusting.
less than 5 mm
Framed Aquarium:
less than 47 mm of
frame thickness
less than
47 mm
more than 47 mm