Assembly And First Time Use - VOSS .sonic MoleEx 1000 Mode D'emploi

INSTRUCTION MANUAL VOSS.SONIC MOLEEX 1000
8

ASSEMBLY AND FIRST TIME USE

Info
► Before use, we recommend storing the cap with the solar panel in a sunny
place for two days to fully charge the battery.
► A powerful solar/battery combination provides sufficient energy day and
night, even on cloudy days. Once charged, the battery lasts up to 7 days
without being recharged.
1. Connect the cable from the rod to the
cap (Fig. 1 and 2).
2. Stow the excess cable inside the rod
and attach it to the cap (Fig. 3).
NOTICE
Make sure that there are no uneven
areas under the solar panel to avoid
damaging it.
3. Press the rod against the cap until the
two parts are firmly attached (Fig. 3).
4. Select a location where you want to position the device.
Follow tips in section 8.1.
Info
Do not insert the device directly into a molehill..
5. Loosen up the soil at the desired location and push the rod
into the soil. Ensure that the rod protrudes 1-2 cm above the
ground to protect the device from water damage caused by
water accumulation on the ground (Fig. 4).
NOTICE
Do not apply excessive force or use any tools
to push the device into the ground to avoid
damaging the device.
Info
► The emitted sound waves have a frequency range between approx. 400 and
1000 Hz. Please note that the range of the device is reduced if the ground is
solid, such as sand, peat or clay.
► Leave the device in continuous operation. It may take up to two weeks before
success result is achieved.
45237 | 11 | 2020 | V2
1.
1-2 cm
15
DE
EN
EN
FR
IT
2.
NL
SV
ES
PL
3.
4.