Genie 250CD Mode D'emploi page 7

Masquer les pouces Voir aussi pour 250CD:
Table des Matières

Publicité

10. The document shredder is only suitable for shredding paper, please do not insert any other
materials, the paper must be dry and clean.
11. Never open the casing. In the event of problems with the device, please contact our hotline.
12. The device may not be operated with a damaged power cord.
13. Please read the manual before operating the machine
14. For indoor use only.
Please do not spray any flammable gas or oil
15.
Setting up the document shredder:
1. Please first insert the collecting tray (for CDs/DVDs) in the waste basket.
Securely mount the document shredder on a waste basket. In the process, ensure that
2.
you do not catch your fingers between the top edge of the waste basket and the
shredder.
Important note:
The document shredder can only be set on one side of the basket. Ensure that the
document shredder is properly fitted onto the basket.
3. Connect the mains plug to a standard 220-240 volt AC socket.
Starting the document shredder:
The sliding switch is located on the top side of the unit and can be set to three (3) positions.
1.
AUTO position: the shredding operation starts automatically as soon as the paper to be
shredded is inserted in the feed slot. After the shredding operation is complete, the device
will automatically deactivate.
2.
REV features the following two functions:
a) Rectifying a paper jam. In this case, the direction of the shredding operation is reversed
before the work cycle ends in order to free the shredding blades. Should you determine
that too much paper has been inserted and the shredding operation slows noticeably,
immediately set the switch to this position, also in the event paper is accidentally
inserted.
b) Shredding CDs/DVDs and credit cards: Insert an individual CD/DVD or credit card in
the designated feed slot on the shredder.
3.
In order to empty the waste basket or in the event the device is not used for a prolonged
period of time, the switch should be set to OFF and the device should be disconnected
from the electrical line.
- 7 -
.
onto this shredder, it may cause fire.

Publicité

Table des Matières
loading

Table des Matières