Troubleshooting; Error Code - Bright 025125 Traduction Des Instructions D'origine

8

Troubleshooting

Error code

ER1 Too little water
ER2 The product overheats
2023_001
Problem
Fill the water container with water until the water level is in
between the minimum and maximum markings on the product. If
the error message does not go off, speak to an approved service
center.
Disconnect the power plug and let the product become cool
before you operate the product again. Make sure that the water
level is between the minimum and maximum markings on the
product. Fill with water if it is necessary. If the error message does
not go off, speak to an approved service center.
Solution
25