Storage; Disposal; To Discard The Product; Technical Data - Bright 025125 Traduction Des Instructions D'origine

6
Push the increase or decrease temperature/time
buttons until the target temperature is 80°C.
Warning! Risk of burn injury. The bottom part of the
product becomes hot when the product is in operation. Do
not touch hot parts on the product.
7
Push the power switch symbol. The product starts to
heat the water.
8
Let the product operate for 20 minutes when the
target temperature is reached.
9
Hold and push the power switch button for 2
seconds. The product enters standby mode.
10
Disconnect the power plug from the power outlet.
Warning! The water is hot. Do not touch the water
with your hands.
11
Let the product become cool.
12
Flush the bottom part of the product with cold water.
13
Wipe the product with a clean and dry cloth.
5

Storage

Let the product become cool and clean the product before
you store it.
6

Disposal

6.1 To discard the product

● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
7

Technical data

Specification
Rated voltage
Power output
Protection rating
Noise level
Dimensions
24
Value
220–240 V
1300 W
IPX7
55 dB
385x125x105 mm
2023_001