Publicité
Les langues disponibles
Les langues disponibles
32
Operating Instruction
Operation
4
Operation
Footpedal
Fig. 9:
Danger
•
Fold foot pedal away when not in
use.
•
Wear safety shoes with none slip
sole.
•
No personnel should be within
the dan- ger zone when raising
or lowering the table.
•
Observe the picture symbols on
the lifting machine.
4.1 Lifting
Stand in front of the machine
Hold the handle
Apply the wheel brakes
Fold down the foot pedal
Pump the pedal repeatedly downwards
until the required height is achieved
You should not travel with the machine
when it is loaded
4.2 Lowering
Stand in front of the machine
Hold the handle
The wheel brakes are already applied
Hold the lowering pedal carefully down
Don`t hold the lowering pedal fully down when
the table is loaded other-wise the load
will lower too quickly.
4.3 Shifting/Tilting
Raise
Lower
Lowering-pedal
Place yourself in front of the equipment.
The locking devices of the wheels are
still on.
To shift or tilt the platform place a
spanner upon the top of the relevant
spindle or at the side of the frame.
Now turn the spindle according to the
symbols affixed to move the platform
into the position desired.
Make sure to note the load every time
you shift the platform to prevent un-
wanted and dangerous changes in
position in time.
Publicité
