Ravaglioli KT100 Mode D'emploi page 28

Operating Instruction
Safety
1.6 Source of Danger
Mechanic Where? Scissors arms /
underframe
What? Crush and shear
points
Danger! Loss of limbs /life
Hydraulic Where? Hydraulic
components e.g.
hoses
What? Because of damage
oil could be
sprayed out under
high pressure
Danger! Burns and
contamination
to the eyes
Foot Pump Where? Operating pedals,
Lifting / Lowering
What? Slipping off pedal
Danger! Injury to the leg
Current Where? Current carrying
components
What? Touch
Danger! Life threatening
Work on the electrical and hydraulic
components should only be carried
out by a competent tradesman!
Danger
Never
• remove
• alter
• take out of service the safety facilities
• Always secure that the machine is out of
service when
• Setting up
• The alteration of the employment
requirements
• The alteration of the operating procedure
• Maintenance
• Servicing
• Repair
1.7 Qualified Operators
The operator must
• be over 18 years old
• be instructed in the operation of the ma-
chine
• have proved to the firm that he is capable
of operating the machine
• have read and understood the operating
instructions
• must observe the operating instructions
1.8 Personal Safety Equipment
For the operating of the machine:
• Safety shoes
For cleaning / maintenance / repair:
• Safety shoes
• Work gloves
• Face protection
1.9 Safety Measures in the Work Place
Secure positioning of the machine
Avoid crush and shear zones between the
machine and it's surroundings
Ensure that the workplace remains clean
and clear of obstacles
1.10 Conduct In An Emergency
Footpump E - Hydraulic
Release the pump/ Release the raise /
lower pedal lowerpush-button
immediately immediately
Switch of at the
mains / remove the
plug
Secure against further
By raised load support the load carrying
component
29