Environmental Protection; Troubleshooting - Unitec 230 V PREMIUM Mode D'emploi Original

Environmental
protection
9. Trouble-
shooting
30
10923_Schlagschrauber_BA_141205.indd 30
8.
Old electrical devices are made of valuable materials so they do
not belong in the household refuse! We would therefore ask you
to support us with your active contribution to saving resources and
with environmental protection and to take this device to a return
point set up for this purpose if there is one available.
Problem
The tool is not
working..
Anomalous noises or
vibrations.
Socket spanner (6)
cannot be placed on
bolts or nuts without
problems.
Cause Solution
The mains plug Connect the mains
(2) is not correctly plug (2) correctly to a mains
connected to a mains socket.
socket.
The mains socket is Makes sure that the
mains socket is supplying
not supplying any
electricity. electricity.
Socket spanner (6) not
Attach the socket
correctly attached to spanner (6) correctly.
the tool.
Tool's screws loose. Tighten all the tool's
screws.
Tool's motor must be Have the tool repaired by an
oiled or repaired. authorised workshop.
. .
The socket spanner Select a suitable socket
(6) selected is not spanner (6) with which the
suitable for the fixing bolt/nut can be worked on.
element (bolt, nut) to
be worked on.
05.12.14 11:04