Safety Instructions For Impact Wrenches - Unitec 230 V PREMIUM Mode D'emploi Original

a) Do not overload the device. Use the correct power tool for the job.
With the appropriate power tool you will work better and more safely within
the stated performance range.
b) Do not use a power tool if its switch is defective. A power tool that can
no longer be turned on and off is dangerous and must be repaired.
c) Pull the plug out of the socket and/or remove the battery before
adjusting the device's settings, changing accessories or putting
away the power tool. These safety measures prevent unintended starting
up of the power tool.
d) Keep unused power tools out of the reach of children. Do not let
people who are not familiar with the power tool or who have not
read these instructions use it. Power tools are dangerous if they are used
by inexperienced people.
e) Take good care of power tools. Check whether moving parts operate
properly and do not jam, whether parts are broken or damaged in
such a way that this adversely affects the working of the power tool.
Have damaged parts repaired before using the power tool.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Carefully looked after cutting tools
with sharp cutting edges stick less frequently and are easier to control.
g) Use power tools, accessories, attachments etc. in accordance with
these instructions. Bear in mind the working conditions and the
work to be carried out. Using power tools for purposes other than those
for which they are intended can lead to dangerous situations.
h) Only allow qualified specialists to repair your power tool and only
allow them to use original spare parts. This will ensure that the power
tool remains safe.
Hold the device by its insulated grip surfaces if you are working on jobs
in which the screw might hit hidden electric wires or the tool's own
mains cable. Allowing the screw to come into contact with a live wire may also
make metal parts of the device live and lead to an electric shock.
• Before using the product, always lock the wheels or put a chock under them
and apply the parking brake.
• When removing or attaching a hubcap, take every precaution so as to avoid
personal injury or damage to property.
• When changing a vehicle's tyres use extra lifting devices and safety support
equipment.
• When using the impact wrench, do not touch the drive with your hands.
10923_Schlagschrauber_BA_141205.indd 21
Using and
handling power
tools
Service
1.2 Safety
instructions
for impact
wrenches
21
05.12.14 11:03