Unitec 230 V PREMIUM Mode D'emploi Original page 20

Safety of
people
20
10923_Schlagschrauber_BA_141205.indd 20
a) Pay attention, watch what you are doing and approach work with
power tools with patience. Do not use power tools if you are tired
or under the influence of drugs, alcohol or medicine. One moment's
inattention when using a power tool may lead to serious injury.
b) Wear personal protection equipment and always wear safety
glasses. Wearing personal protection equipment such as dust masks,
non-slip safety shoes, protective helmets and/or hearing protection,
depending on the nature and use of the power tool, reduces the risk
of injury.
c) Prevent unintended operation. Make sure that the power tool has
been switched off before you connect it to the mains and/or the
battery, pick it up or carry it. If you have your finger on the switch when
carrying the power tool or if you connect the power tool to the electricity
supply when the tool is switched on, this may lead to accidents.
d) Remove any adjustment tools and/or spanners before switching
on the power tool. A tool or spanner left in a rotating equipment part may
lead to injury.
e) Avoid any abnormal postures. Make sure that you are standing firm and
keep your balance at all times. In this way you will have better control over
the power tool in unexpected situations.
f) Wear suitable clothing. Do not wear baggy clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts.
Loose clothing, jewellery or long hair may be caught by moving parts.
g) If vacuum cleaning and dust extraction equipment can be fitted,
make sure that they are connected and being correctly used.
Vacuuming up dust may reduce risks from dust.
05.12.14 11:03