HP SCANJET ENTERPRISE 9000 Guide De Démarrage Rapide page 11

6. Start the scan.
• If you have installed the HP Smart Document Scan Software, press the Scan
Simplex ( ) or Scan Duplex ( ) button. The page will feed through the scanner.
A scan of the page will appear on your computer screen. If a scan does not appear
on your computer screen, see "Installation troubleshooting" on page 19.
• If you do not have HP Smart Document Scan Software installed, scan from the
software application you intend to use for scanning. If the scan processes as
normal for this application, then the software installation is successful. If it does
not process normally, consult the software help for your application.
7. Install any additional software that you want to use.
TIP: To test a drivers-only installation, press the Tools ( ) button to open the
Scanner Tools Utility. This indicates that the ISIS driver was installed successfully.
Test the installation 7