Publicité
Les langues disponibles
Les langues disponibles
3. The blender allows you to set the Normal Pulse to your desired speed.
While blending: Hold the Normal Pulse
or Speed Down
show the setting speed, and motor speed will change.
NOTE: The Normal Pulse speed can be set from 5% to 100%. Once the
Normal Pulse
will return to STANDBY mode. The changed pulse speed will be stored in
memory to replace the default speed of 100%.
1. There are 4 Program buttons for four reprogrammable beverage stations
for easy operation and consistent results. The factory-set stations are
programmed as listed below:
2. To run any of the above preset programs, blender must be in
STANDBY mode.
3. Press desired Program button to start the blender. The motor will run at
the preset speed within the preset blending time. The LCD will show time
remaining. Once the blender counts down to 0, the motor will stop running
and the blender will return to STANDBY mode and prompt "PRESS ANY
BUTTON TO BLEND" to begin another function.
NOTE: To terminate a blending program, simply press START/STOP
button or any of the Program buttons. After doing this, the blender will
return to STANDBY mode and LCD will prompt "PRESS ANY BUTTON
TO BLEND."
REPROGRAMMING BEVERAGE STATIONS
Users can add 4 new programs to meet their needs. A program can consist
of several sections, each with a different speed and running time.
For example,
as shown below:
Section 1: speed = 75%; time = 30 seconds
Section 2: speed = 100%; time = 20 seconds
Section 3: speed = 50%; time = 20 seconds
The program has the following limitations:
Speed: 5% to 100%
Time: 5 to 90 seconds
Total running time in a program cannot exceed 90 seconds, i.e., sum
of the sections cannot be longer than 90 seconds.
NOTE: The
during the reprogramming process.
button to adjust the blending speed. The LCD will
button is released, the motor will shut off and the blender
REPROGRAMMABLE STATIONS
70% speed, 10 seconds blend time
70% speed, 15 seconds blend time
70% speed, 20 seconds blend time
70% speed, 25 seconds blend time
can be replaced with a new program that has 3 sections,
button will act as the enter key to proceed to the next step
button and press Speed Up
10
Publicité
