Use - DS Produkte Z 04686 Mode D'emploi

Use

Conventional Weighing
CAUTION!
■ The results which are calculated are only reference values and act as a guideline.
You are explicitly advised against using the results as the basis for any form of
medical treatment or diet! You must consult your doctor if you have any questions
about your weight, a medical treatment or a diet.
■ Do not stand on the scales with wet feet and make sure that the measuring surface
is dry. You could slip!
■ The body analysis scales are designed for a maximum body weight of 180 kg (397 lb
or 28 : 5 st)! A higher weight may damage the scales!
■ Handle the scales carefully as they are a delicate measuring instrument. Do not drop
the device, do not jump on it and keep water and other liquids away from it.
• Weigh yourself without any clothing and barefoot. To make it easier to
compare results, it is advisable to always weigh yourself at the same time
and under the same circumstances.
• Stand on the contact areas during weighing. The scales can only work
properly if you place yourself correctly on the contact areas.
• Measurement of the body fat and water content as well as muscle and
bone mass is only possible with bare feet. Give the contact areas a wipe if
necessary in order to improve the conductivity. The feet must be dry!
• The scales round up the weight to the nearest 100 g (0.2 lb).
• The scales react to a minimum weight of 3 kg (6.6 lb or 0 : 4 st).
1. Place the scales on a dry, even, and fi rm base (avoid carpets). Uneven fl oors will
result in inaccurate measurement results.
2. Stand with both feet on the scales. The body weight will be calculated.
3. Once the body weight has been established, the number on the display begins to
fl ash. You can now get off the scales.
You can choose whether the weight should be displayed in kilograms (kg),
pounds (lb) or stone (st). Press the Unit button on the back of the scales to
set the unit.
4. The scales switch off automatically after a few moments.
Setting a User Profi le
Before the scales can calculate your body fat and water content and the content of bone
and muscle mass, the following details need to be saved in your user profi le: Gender,
height, age. You have the option of saving up to 10 user profi les.
The user profi le is entered using the buttons on the front on the scales display:
 Increase a value
 Reduce a value
Start of programming mode; confi rmation of the selected value and switch
SET
to the next parameter
19 EN