Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
f
Slide the dial cover down to remove it
g
Remove the markers (x2) from the Touch Unit
Use the removed markers to perform angle adjustment for laser diffusion after installing the Touch Unit.
h
Determine the installation position for the Touch Unit
We recommend marking the following installation positions to make installation easier.
(
): Center line of installation pattern. Align with the center line of the Touch Unit (
(
): 25 mm from the top edge of the projected image. Align with the bottom edge of the Touch Unit.
49
Installation Guide
).
[Unit: mm]
Publicité
Chapitres
Table des Matières
