Epson EB-595Wi Guide D'installation page 63

m
Stick the infrared deflectors supplied so that the laser is not reflected by the obstacle (only
if there is an obstacle near the projection screen that cannot be moved)
Stick the deflectors between the dots and the obstacle. Adjust the number of deflectors according to
the number of dots.
Remove the tape from the back of the infrared deflectors, and stick them on the screen.
c
•
Do not remove an infrared deflector once it has been stuck in place. This can weaken the adhesive
strength of the tape.
•
Do not stick tape or place anything on the infrared deflectors. The infrared deflector will not
function correctly.
After placing the infrared deflectors, press the [
perform step 12 again.
If the dots do not disappear even after attaching the infrared deflectors, turn the adjustment dials
about a quarter turn counterclockwise. Next, press the [
and then perform step 12 again.
If the dots do not disappear even after performing the above procedures, contact your local dealer
from the Epson Projector Contact List provided on the Document CD-ROM.
n
Store the markers in the Touch Unit
] or [ ] button on the remote control, and then
] or [
61
Installation Guide
] button on the remote control,