Install Batteries; Operation Description; Power On/Off - Velleman MVR1 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2. Install Batteries

1.
Open the battery box cover. Slide the battery cover to the right as
indicated by the arrow and place the 2 batteries (AAA) into the
Player according to proper polarity, and then re-fit the cover by
pushing it in opposite direction to the left as indicated by the arrow.
2.
Power on after the batteries are in place to examine the remaining
power in the batteries. The system will automatically indicate "Lo"
for 2s in case of low voltage. Under MP3 playing/playing mode,
the volume will automatically decrease by half in case of low
voltage, after which the "Lo" will emerge every 10 seconds,
indicating the user to replace batteries until auto power off; under
recording/pause recording mode, the system will save current
recording files and return to stop record mode, under which a "Lo"
will indicate that the recording can not be performed in case of
low voltage.
3.
When the battery remains only two columns, the Player will stop
playing and exit because of insufficient power supply caused by
heavy consumption of built-in amplifier, in which case please turn
down the volume or use headset. The operating time of battery
varies from battery type and playing volume.
Sufficient

3. Operation Description

3.1 Power on/off

Under power off status, you need to press the PLAY key for 2s to boot up. The memory space will
be displayed for 2s, and then enter into idle mode (i.e. record mode), as shown in the figure. If
there is no key operation within 2m under idle mode, the system will automatically power off. Under
normal status, press the STOP key more than 2s to automatically shut down. The upper row 00 in
the figure indicates that current playing song is the 0 one, and the lower row F00 indicates the total
number of songs. The lower row will alternatively show total number of songs and current song
time when there is a record file or downloaded MP3 music.
3.2 Record
The system will enter record mode (DVR) after booting up. Shortly press the MODE key under MP3 mode to select
record mode. Under stop record status and record mode, shortly press VOL+ or VOL- key to select voice activate
function and recording modes: LP is long-time record , SP is short-time record, 00 is not voice activate function , 01
is voice activate function . The system displays the following, then press "record" key to enter.
MVR1
Heavy consumption
Out of power
4
VELLEMAN

Publicité

Table des Matières
loading

Table des Matières