Chain Lubrication; Chain Oil Top Up; Starting And Stopping; Starting A Cold Engine - Sandri Garden SG 1225/25 CS Instructions De Service

PEtROL CHAiN SAW FOR tREE SERViCE USER MANUAL
RECOMMENDED OiL
High quality 2 stroke engine oil:
JASO rating: FC
W a r n i n g ! U s i n g o i l o f l o w e r
q u a l i t y t h a n t h e t y p e a b o v e
recommended,couldseriously dama-
ge the engine.
2) Mix by shaking the fuel con-
tainer extensively before each
refuelling.
Prepare a quantity of fuel that can be used
within 1 month
3) Prepare the fuel mix and pour the fuel only in
an outdoor location (fig.28).
4) Store the fuel in a suitable container and with
the cap tightly closed.

6. CHAiN LUBRiCAtiON

1) WARNiNG! Only use oil specifically designed
for chain saw lubrication (see fig.29).
2) DO NOt use old oil.
3) Using a non recommended oil can damage the
guide bar, the chain and the lubrication system.
During each refuelling operation, also top up
the chain oil tank.
Fig.29
7.

StARtiNG AND StOPPiNG

OPERAtiON
WARNiNG! Strictly follow the safety
Fig.28
rules specified in the previous chapter
2 MAiN SAFEtY PRECAUtiONS.
DANGER! Start the chain saw only
when all its parts are in place, including
the guide bar and chain.
StARtiNG tHE CHAiN SAW

StARtiNG A COLD ENGiNE

Before starting the engine, apply the chain
brake by pushing the chain safety lever all the
way forward (fig.30)
Fig. 30
GB
StOP
55