Variable Speed Trigger Switch - EDMA INSULACUT Guide D'utilisation

LOCK-OFF BUTTON
The lock-off button (1) is a safety device designed to reduce the possibility that a user
accidentally starts the saw. This button must be pressed before the trigger switch (2) can
be squeezed.
NOTE : the lock-off button can be pressed from either the left or right side of the handle.

VARIABLE SPEED TRIGGER SWITCH

The variable speed trigger switch both turns the tool ON and OFF as well as controls the
speed of the saw.
3. To turn the saw ON, depress the lock-off button with your thumb.
4. While holding the lock-off button in the depressed position, gently squeeze the trigger
switch. The saw will start at its slowest speed.
6. Once the saw starts, release the lock-off button. The saw will remain running until the
trigger switch is released.
7. To increase the speed of the saw, squeeze the trigger switch harder.
8. To turn the saw OFF, release the trigger switch.
2
22
1