Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLING A BLADE
!
WARNING :
adjusting the saw in any way.
4.
To install a blade in the saw, rotate the blade-locking sleeve clockwise (1) as far as it
will go.
5.
Insert the appropriate blade (2) into the blade slot (3) as far as it will go.
6.
Release the blade-locking sleeve.
NOTE : pull outward on the blade to ensure it is properly locked into the blade holder.
REMOVING A BLADE
To remove a blade, simply rotate the blade-locking sleeve clockwise as far as it will go and
remove the blade from the blade holder. Use protective gloves for this operation.
always remove the battery before installing or removing a blade or
1
3
2
21
Publicité
Table des Matières
