Numark PARTY MIX LIVE Guide D'utilisation page 6

Beat-Matching and Mixing with Party Mix Live and Serato DJ Lite
Below is an example of how to mix tracks using Party Mix Live and Serato DJ Lite:
1. Start with the Level and EQ knobs at the 12 o'clock position.
You can adjust these after the tracks are loaded.
2. Turn the Browse knob to scroll through your music library.
3. Load tracks with similar BPM onto Decks 1 and 2 by pressing
the Load 1 and Load 2 buttons on Party Mix Live.
4. Move the crossfader on Party Mix Live all the way to the left to
send the audio from Deck 1 to the main outputs.
5. Play the track that is loaded on Deck 1.
6. Press the PFL/Cue button on Deck 2.
7. Play the track that is loaded on Deck 2 to preview it in your
headphones. Press Sync on Deck 2 to match its BPM with Deck
1.
8. While the track is playing, press the Cue button to return to the
beginning of the track.
9. Play the track that is loaded on Deck 2.
10. Move the crossfader on Party Mix Live toward the right to
crossfade from Deck 1 to Deck 2.
6