DeWalt DW168F Guide D'utilisation page 6

WARNING: RISk Of hOT SURfACES
What can happEn
• Touching exposed metal
(muffler and other engine
parts) can result in serious
burns.
WARNING: RISk fROM MOvING PARTS
What can happEn
• The engine can start
accidentally if the flywheel is
turned by hand or moved by
pulling on the pull starter.
hoW to prEVEnt It
• Never touch any exposed
metal parts on engine during
or immediately after operation.
The engine will remain hot
for several minutes after
operation.
• Do not reach around
protective shrouds or attempt
maintenance until engine has
been allowed to cool.
hoW to prEVEnt It
• Always disconnect the spark
plug before performing
maintenance.
• Moving parts such as the
pulley, flywheel, and belt can
cause serious injury if they
come into contact with you
or your clothing.
• Attempting to operate engine
with damaged or missing
parts or attempting to repair
engine with protective
shrouds removed can expose
you to moving parts and can
result in serious injury.
6
• Never operate the engine with
guards or covers which are
damaged or removed.
• Keep your hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long
hair can be caught in moving
parts.
• Air vents may cover moving
parts and should be avoided
as well.
• Any repairs required on this
product should be performed
by a D WALT factory
e
service center or a D WALT
e
authorized service center.